In this post, we present Total offer for Compounds, which includes one of Total most innovative brands, Bio-TPSeal®, specialized in special applications (specific and tailor-made compounds), and rotomolded products such as Fuel tanks.
Resins for compounders
Total wide range of natural resins in Polyethylene (PEHD, EVA, PELD), provides many options to help Polyproylene and Polystyrene compounders develop new innovative compounds in a lot of different fields, ranging from masterbatches to appliances.
All the flebility and properties required for a good compoundability are provided by the unique characteristics of Total materials.
Special applications. Specific and tailor-made compounds
To respond to the needs of some very specific and demanding markets, Total has developed specialty compounds such as electrically conductive compounds for industrial packaging industry. Along with the specialty compounds, Total also has different tailor-made possibilities dedicated to the rotomolding industry.
Bio-TPSeal®
Bio-TPSeal® is a proprietary alloy of metallocene PE and PLA (a polyester derived from natural resources).
Product benefits
- Low shrinkage and low warpage
- Good surface aesthetics and gloss
- High stiffness
- 100% recyclable
- Can be used in multilayer structures:
- Paintable with PLA top-layer
- In skin-foam-skin applications with TPSeal® for foaming
- Bonds with PU foam
Applications in rotomolding
- Automotive (replacing polyester, metals…)
- Design (low warpage and high gloss)
- Light weight, high strength parts
Bio-TPSeal® product range
| Characteristics | Method | Grades | |||||||
| BTPS: 0650_03 | BTPS: 0650_05 | BTPS: 0750_03 | BTPS: 0750_05 | BTPS: 0850_03 | BTPS: 1000_05 | BTPS: 1100_03 | BTPS: 1350_05 | ||
| MI2 g/10º | ISO 1133D | 3.0 | 5.0 | 3.0 | 5.0 | 3.0 | 5.0 | 3.0 | 5.0 |
| Density (g./cc) | ISO 1183 | > 0.955 | > 0.955 | > 0.955 | > 0.955 | > 0.955 | > 0.955 | > 0.955 | > 0.955 |
| Bell ESCR (F50 in hours) Igepal 10% | ASTM D 1690 | >1000 | >1000 | >1000 | >1000 | >1000 | >1000 | >1000 | NA |
| Tensile properties (4.5 MM) | |||||||||
| Yield stress (Mpa) | ISO 527-1B | 18 | 18 | 19 | 19 | 19 | 23 | 27 | – |
| Tensile modulus (Mpa) | ISO 527-1B | 650 | 650 | 750 | 750 | 850 | 1000 | 1100 | 1350 |
| Elongation at Break (%) | ISO 527-1B | 500 | 450 | 350 | 300 | 650 | 200 | 600 | 10 |
| Impact properties at -20ºC (4.5 MM) | |||||||||
| Total Energy (J) | ISO 6603 | 70 | 85 | 50 | 50 | 65 | 65 | 60 | 25 |
| Typical applications | ISO 6603 | Skin-foam-skin | Automotive design | Skin-foam-skin | Automotive design | PU foam-skin | Kayaks and surfboards | Kayaks and surfboards | Very high stiffness Multilayer |
Resins for rotomolded fuel tanks
Gasoline Tank: TPSeal®
The Rotomolding Solution to Meet Stringent CARB and EPA Fuel Permeation Regulations.
Twin layer: TPSeal® M3670 or M3671 outside with Polyamide Rilsan® ROTO 11 inside.
Product benefits
- Meets CARB (Californian Air Resources Board) requirements (<1.5g/m2/day)
- Ultra-low permeation to fuel CE10 (10% ethanol) – Meets EPA (Environmental Protection Agency) requirements (<1.5g/m2/day)
- Excellent permeation resistance to higher alcohol fuels
- Two layer composite system with excellent adhesion
- Can be used in multilayer structures:
- Critical to ensure low permeation, especially to alcohol containing fuels
- No loss of adhesion when tank is drilled and tapped or when mechanical inserts are installed
- Passes SAE J1241 motorcycle fuel tank lateral impact test
- Passes SAE J288 snowmobile fuel tank impact test
- Passes US Coast Guard regulation for permanently installed marine fuel tanks
- Excellent toughness and impact resistance
Applications
Motorcycle, Recreational Vehicles, SORE (Small Off-Road Equipment), Agricultural, Industrial, Lawn and Garden, Marine and Automotive.
Rotomolding resins to perform
Rotational molding portfolio
| Grade | Main properties | Typical applications | Comments | ||||||||||||||
| Density (g/cm3) | Melt flow rate | Form | Flexural Modulus (MPa) | Heating oil tank | Chemical tanks | Fuel tanks | Underground Chamber | Water tanks | Hot Water Applications Air Duct | Design | Marine | Multilayer Foam Rotolining | Technical parts | Automotive, PU Foam, high stiffness parts, multilayer structures | |||
| PE | Lumicene® M 3421 UV | 0.934 | 2.7 | pellets/powder | 590 | x | x | x | x | TÜV CE R29 | |||||||
| Lumicene® M 3421 UV Black | 0.934 | 2.7 | pellets/powder | 590 | x | x | x | x | TÜV CE R29 | ||||||||
| Lumicene® M 3581 UV | 0.935 | 6 | pellets/powder | 700 | x | x | x | TÜV CE R29 | |||||||||
| Lumicene® M 3581 UV Black | 0.935 | 6 | pellets/powder | 700 | x | x | x | TÜV CE R29 | |||||||||
| Lumicene® M 4041 UV | 0.940 | 4 | pellets/powder | 730 | x | x | x | TÜV CE R29 | |||||||||
| Lumicene® M 4041 UV Black | 0.940 | 4 | pellets/powder | 730 | x | x | x | TÜV CE R29 | |||||||||
| PE Customized compounds | 0.918 to 0.960 | 2 to 16 | pellets/powder | x | x | x | x | Grades and colors on demand | |||||||||
| PP | Lumicene® PP TRC-B-0213 | 10 | powder | 1200 | x | x | x | x | Clarified PP | ||||||||
| Lumicene® PP TRC-B-0318 | 15 | 800 | x | x | Impact modified PP | ||||||||||||
| PP Customized compounds | 5 to 30 | powder | x | x | x | x | Grades and colors on demand | ||||||||||
| EVA | EVA TRC-D-007 | 0.935 | 4.5 | powder | 60 | x | Flexible part | ||||||||||
| PLA | PLA TRC-D-017 | 1.240 | 14 | 3500 | x | pellets/powder | Biodegradable & Paintable | ||||||||||
| Technologies | TPSeal® N3670 | 0.941 | 3.5 | powder | x | x | x | x | x | x | |||||||
| TPSeal® N3671 | 0.941 | 3.5 | powder | x | x | x | x | x | x | ||||||||
| bio-TPSeal® product range | >0.955 | 3 to 9 | powder | x | x | x | x | x |
